I was constantly rummaging through dangerous spikes to try to find the most-used tools- so I decided to make a tool rack! It was super easy and I must say- now that it;s up we’ve already used it many times and it is so bright, colourful and neat that it makes me smile every time I see it!
Take a look through the steps below to make your own.
A quick video of my completed tool rack sitting pretty in the laundry:
First of ally evaluate your tools one by one and put aside anything you would like to have on hand. For me this was mainly different sorts of screws and hammers, but for others this might be an assortment of nails and screws, different paint brushes or pens and textas.
Next think about how you would like to arrange AND affix these different items to your board. For me this meant measuring out the space above the washing machine in the laundry where I was going to hang the board and laying down my tools in the order I thought I’d organise them in. Take a photo at this stage so that when you go ahead with drilling holes everything fits as it should.
At this stage I started thinking about how I was going to affix the tools. All of my tools would stay up from dowel pegs (either under the handle, or looped through the middle) but you might consider hooks to hold rubber bands, cups to hold smaller paint brushes or even mini drawers to hold screws etc.
I then took myself off the Bunnings to get a piece of MDMF cut to size, pick up a pot of salmon sample paint plus waterproofing vinyl spray, a packet of wooden dowel pegs, a bracket to affix to the wall and two door hinges to affix my board to the bracket (as well as screws and nuts).
I painted the whole thing in two thin coats of salmon paint with a sample pot rolling brush. I think a fun colour really pops in a boring space like a laundry and makes gritty tools look much more appealing. I then sprayed the whole front and back of the board in waterproofing vinyl as it is going to be in the laundry.
Once dry, I placed all of my tools out on the board, referencing my earlier photo, and marked the centre of the spots for the dowel pegs with pencil- use a ruler over the top of the tools where possible to make the corresponding spot level. I then drilled a shallow mark in each spot while the tools where still on the rack- just to make sure the dowel would sit snug enough to hold the tools, but not too snug so the tools couldn’t actually fit!
Then I removed all the tools, lifted the board up and drilled all the way through- I used a drill bit that was just a bit smaller than the dowel pegs. I then hammered each through with a rubber mallet, drilled the hinges on and popped it up on the wall! Couldn’t be happier with my new easy to access tools :)
Thanks for reading The Nookbook!